Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be due to a dead battery in the coin-cell unit, water damage, receiver modules issues, or a malfunctioning chip. Fortunately, these issues are easy to fix and you'll be able to get your vehicle back to normal in no time at all!
Car keys can also be damaged due to the blade getting worn. You can easily fix this problem by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The key fob on your Peugeot 308 may die or become weak enough to not send a strong signal. This could cause the key fob's function to cease which prevents you from opening and locking the doors, or even starting your engine. To fix this issue, you'll have to replace the battery on your key fob.
You'll have to purchase the replacement battery from an auto parts store or your local hardware store. When you purchase the battery, ensure that it's new and hasn't been on the shelf for a long time. A brand new battery will have greater capacity and can transmit a stronger signal to the car.
After replacing the battery try unlocking the doors and locking them using the key fob. If the doors won't unlock it's likely that the receiver module inside the car is responsible. Your local Peugeot dealer can reprogram the receiver module.
The internal chip of the key fob can also be damaged. This could happen if drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture can get worn out over time, particularly if your key fob is exposed to water for long periods of time like submerging it in the ocean at the beach. To avoid this you must keep your key fob free of moisture and away from water.
Water Damage
Don't give up on your key fob when it gets wet, regardless of whether you slipped into the pool or slipped into a pool. The key fob is protected by rubber seals however, prolonged exposure to water could damage its electronic chip. Because water is an excellent conductor and conductor, any water that is able to get inside the key fob will result in a series of short circuits that eventually damage the chip. After removing the batteries clean the contacts with isopropyl. Dry them completely before putting them back in.
A dead battery can also be the reason that your Peugeot 308 won't start. If you have a spare vehicle, jumper cables can be used to get the engine going again. If the battery is damaged and needs to be replaced, it should be replaced.
Another possibility is a bad receiver in the vehicle that could block the signal from the key fob. It could be due to a issue with the antenna or wiring, or the key fob may be damaged. If you are using a new key fob, it may need to be programmed to the vehicle. If you are unable to solve the issue, you should contact an expert technician. A trained technician in the field will be able to diagnose the problem quickly, and then fix it right away.
Radio Interference
Interference may cause symptoms such as a fob that isn't recognized or has a limited range. The interference can be transmitted or radiated, which is caused by speaker and power cables passing too close to electrical parts. In general, rerouting cables or moving them away from these components will resolve the problem.
It's unlikely that someone is listening in on your key fob's signals to steal your car, but it is possible that the signal has been masked by radio frequency interference. Fortunately, this is not a problem to fix.
If your key fob is not being recognized by the system, try replacing the battery. Make sure the battery is of the correct size and type. Incorrectly sized batteries could harm the fob.
These devices could interfere with the key signal, if they utilize the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system is a receiver that receives radio frequency signals from the key fob. If this receiver has developed a problem, you won't be capable of starting your car even if the key fob works and can be reset. The issue can result from a variety of reasons, such as the dead battery in the coin and water damage. The receiver may also be malfunctioning due to an internal or software glitch or damage to the key itself.
The battery for your coin in your Peugeot 308 keyfob is likely to have died. You can easily replace this by a new battery but it is important to choose the right battery for your key fob. The wrong battery could lead to further problems with the key fob, so it's best to use the original battery or an equivalent replacement in size, voltage, and specifications.
Your Peugeot 308 keyfob may not function if it was associated with a different vehicle. peugeot 206 key replacement may have accidentally given your key fob away to someone else or it was used to unlock other vehicles. This can be resolved by reprogramming the key fob with an OBDII scan. This tool will ask for information about your vehicle, like its VIN or engine type. It is vital to enter the correct information.